Freud SD308 8-Inch Safety Dados On Sale

$239.05 Look Price Now

Freud SD308 8-Inch Safety Dados Brand: Freud Produces flat-bottomed, splinter-free grooves or rabbets Carbide-tipped AKD limiters reduce kickback and overfeeding Maximum cut width: 13/16 inches 15-degree hook angle ( Read customer review and Compare Price for our Porducts)

Freud SD308 8-Inch Safety Dados Review

Freud SD308 8-Inch Safety Dados "best microwave brand"

"top ten refrigerators", "double patio door", "carrier window air conditioners", "hot tub compare", "6204 bearing", "compare hot tub", "ebay sinks", "sinks ebay"

Freud SD308 8-Inch Safety Dados Feature

Produces flat-bottomed, splinter-free grooves or rabbets

Carbide-tipped

AKD limiters reduce kickback and overfeeding

Maximum cut width: 13/16 inches

15-degree hook angle

• best microwave brand : Freud SD308 8-Inch Safety Dados Check Product Rating

Freud SD308 8-Inch Safety Dados Overviews

Clean edges, square shoulders, and flat bottoms: the Freud SD308 Eight-Inch Safety Dado Set cuts with ultimate precision, so you can achieve them all. Boasting razor-sharp outside blades, thick MicroGrain carbide tips, and an anti-kickback design, this is your go-to set for safely and efficiently creating dadoes and grooves spanning 1/4 to 13/16 inch. This versatile kit cuts a wide range of materials from hardwood to laminate.

Razor-Sharp Blades for Smooth, Splinter-Free Dadoes
The perfect dado set for the fine cabinetmaker or weekend woodworker, the Freud SD308 produces dadoes and grooves that meet with flush, even edges. So you can be assured of precise cuts every time, the set is equipped with precision-grade features, starting with two proprietary razor-sharp outside blades.

These high-quality eight-inch, 22-tooth blades with 5/8-inch arbors cut dadoes and grooves that are clean, flat, and virtually splinter free. Cuts made by these blades are accurate the first time, saving you from making repeated passes over the same workpiece.

Flexibility for Cutting Hardwoods, Laminates, and More
The Freud SD308 fits all table saws and radial-arm saws and accommodates a wide range of materials, so you can use it from project to project. Use it to create dadoes and grooves in hardwood, softwood, chip board, plywood, and laminate (not recommended for non-ferrous materials).

Two-Wing Chippers for Truly Flat-Bottom Grooves
The set's five included chippers (four 1/8-inch chippers and one 1/16-inch chipper) save you time and energy. With their two-wing design, they efficiently remove waste material and smooth the edges of your workpiece. Plus, with the help of the included Shim Set, you can fine-tune your cuts from 1/4 to 13/16 inch in 1/16-inch increments amd adkist the kerf width by as little a .04 inches.

Anti-Kickback Design for Safe Operation
The quality of this dado set is enhanced by its anti-kickback design, which gives you an added margin of safety while you work.

MicroGrain Carbide Tips for Long-Lasting Performance
So you can get maximum performance out of this set, the blade components are constructed with Freud's TiCo Hi-Density Carbide. This means the blades can withstand numerous sharpenings and still retain their precision. And a Tri-metal Brazing process gives the blades impact resistance, so they last for the long term without dulling (a condition that can cause torn wood and uneven cuts).

About Freud: A History of Innovative Manufacturing
An industry leader for more than 50 years, Freud America, Inc. is a manufacturer and marketer of superior carbide cutting tools for the woodworking industry. Freud is the only manufacturer of woodworking tools in the world that produces its own MicroGrain Carbide with Titanium, called TiCo, a high-density combination of Titanium and Cobalt.

By producing its own carbide, Freud has the unique ability to formulate each tool for each specific application, thereby maximizing the cutting life and performance of the tool. Freud's full line of high-quality woodworking tools includes saw blades, router bits, shaper cutters, power tools, and more.

This product is covered by Freud's Limited Lifetime Warranty.

What's in the Box
Freud SD308 Eight-Inch Safety Dado Set with two eight-inch outside blades (with 5/8-inch arbors), shim set, four 1/8-inch chippers, one 1/16-inch chipper, and a storage case.

best microwave brand : Freud SD308 8-Inch Safety Dados >Compare Prices<

Freud SD308 8-Inch Safety Dados Reviews

1. 
   
   
   

   
   
   

   
   

   
   

   I just received this dado set for Christmas. I set it up on my Jet contractor saw and cut 3/4" dados 3/8" deep in pine, oak, and melamine with no problems whatsoever. The dados were absolutely flat with no tearout in the pine or oak. There was a microscopic amount of tearout on the melamine, but I had to search extremely hard and squint just right to see it. My saw never even began to slow or "bog" down even when cutting the oak. For the average woodworker, this set is perfect. I am extremely satisfied.

   
   

   
   
   
   


2. 
   
   
   

   
   
   

   
   

   
   

   I've run this dado set through just about every material there is and it produces sharp sidewalls and flat bottoms every time. The blades run true and with about 150 lineal feet of material run through, the teeth are still sharp. Just remember to clean the resin or glue residue from the cavity behind each tooth as it builds up easily and starts to burn the work piece. I have a Jet contractor's saw with the 1.5 hp motor. The dado insert you can order from Jet will only accomodate a 6" dado set. You will have to use a zero clearance insert to make your own, otherwise you can use the metal one from Jet and limit the depth of cut to about 1 1/4". Kind of defeats the purpose of the 8" blade. Also these blades are heavy and if you use the entire stack, the 1.5 hp motor does not have enough power to cut a dado to more than 3/4". You will have to make more than one pass to cut one deeper effectively.

   
   

   
   
   
   


3. 
   
   
   

   
   
   

   
   

   
   

   Right out of the box onto my Delta table saw, cut flat bottomed dadoes with no splintering. Case came with the scantest instructions and didn't diagram all the thickness combinations. I may pick up the shim kit for less than 1/8" increment set ups.

   
   

   
   
   
   


4. 
   
   
   

   
   
   

   
   

   
   

   This is my first set of dado blades purchased and hopefully the only set I'll ever need. I'm putting together a shop full of tools that will last a lifetime, however I am always swayed by price. In this case, I don't think anyone would argue that you'de have to sacrifice any quality for the reasonable price of this blade set. Lots of bang for the buck, and more than any "weekend wood warier" will ever need! Plus, the blades come in a very nice carrying case!

   
   

   
   
   
   


5. 
   
   
   

   
   
   

   
   

   
   

   This is a very sharp, nice stacked head Dado blade. Just what you would expect from Freud. And, the price for an 8" blade like this is good. The only complaint that I have is that the outside blades on mine have a microscopically high point, so if I make a two pass Dado, you can see a scored mark in the bottom of the Dado. It is not deep enough to see from the side, so for almost all applications it works fine. Oh yeah, the box is cheap, but hey, your buying the blade and besides it's probably good enough anyway.

   
   

   
   
   
   






Freud SD308 8-Inch Safety Dados Rapid







List price : $239.05 | Check today price This item ships for FREE with Super Saver Shipping. and special price for more dealers.